moppiano.blogg.se - Fortinet vpn client same subnet

#Fortinet vpn client same subnet how to#
#Fortinet vpn client same subnet password#

Remote Network IP: Enter the LAN IP of the Fortinet FG-81E as 192.168.2.1.

Perfect Forward Secret: select Disable.

IKE phrase 1 proposal: select 3DES_MD5_G2.

IKE phrase 1 mode (IKEv1): select Main mode.

Then click Advanced, the IKE Advanced settings panel appears, we will configure with the following parameters.

IPSec Security Method: Select High(ESP) and select 3DES with authentication.

#Fortinet vpn client same subnet password#

(Note to remember this password to enter the same for Fortinet side)

IKE Authetication Method: Select Pre-Shared Key and enter the password in the box next to it.

Server IP/Host Name for VPN: Enter the Fortinet FG-81E’s WAN IP address .x.

Type of Server I am calling: select IPSec Tunnel IKEv1.

VPN Dial-Out Through: Select WAN1 First and select the IP address of the WAN1 port as .x.

Call Direction : Select Dial-Out ( Draytek device will wait for another device to make incoming VPN connection ).

In this section we will configure the following parameters:

The Profile Index table appears, we will configure the Common Settings, Dial-In Settings, TCP/IP Network Settings sections. To create a VPN connection on Draytek we need to log in to the admin page, then go to VPN and Remote Access > LAN to LAN.Ĭlick on any Index you want to create, here techbast click on Index 2. We will perform IPSec VPN Site-to-Site configuration between two Fortinet FG-81E and Draytek Vigor2925 devices so that the LAN subnet of both sites 192.168.2.0/24 and 192.168.4.0/24 can be connected to each other. Next is the LAN layer 192.168.4.0/24 configured on port 1 of the Draytek device.

We have an internet connection on WAN port 1 of the Draytek Vigor2925 router with a static WAN IP of .x using a media converter.Next is the 192.168.2.0/24 LAN layer configured on port 2 of the Fortinet FG-81E device.We have an internet connection at WAN 1 of the Fortigate FG-81E device with a static WAN IP of .x using a media converter.

#Fortinet vpn client same subnet how to#

The article will show you how to configure IPSec VPN Site-to-Site between two firewall devices Fortinet and Draytek Vigor2925.